Global 1201 Spooling Winch Services for Technip FMC

Motive FZC was contracted by Technip FMC to supply a 75Te WLL Spooling Winch and technician to remove and install crane wires on the G1201 at the Drydocks facility, Dubai. Following an earlier hire on project an additional request was placed to Motive for a follow up rental. A new winch was required to be mobilised and delivered to the client within 4 weeks.

Generally, this scope is standard supply for Motive, however on this occasion there was not a Spooling Winch readily available for the job and not enough time to send an alternative winch from another Motive base.

In order to fulfil the client requirement, Motive FZC committed to manufacturing a Spooling Winch in the UAE within a 25 day timescale.

75Te WLL spooling winch

Motive FZC successfully manufactured and delivered the required winch to its client on time.

 Build Timescale

  • Time required for Motive Engineering design team to design, verify and issue fabrication drawings – 3 days
  • Fabrication of all steel parts and welding work  - 12 days
  • Blasting and painting (1st coat and 2nd coat) – 2 days
  • Assembly and fitting hydraulic components – 4 days
  • Final coat of paint – 1 day
  • Testing and certification – 2 days

“A note of thanks to the Motive team in Dubai, under difficult time constraints new equipment was manufactured, assembled and tested to satisfy our project requirements. Eddie and his team provided excellent updates on progress and collaborated to ensure timely delivery. Motive took an open and honest approach throughout. During use of the equipment on-board our vessel it was noted that having an operator/technician was beneficial, should we have had any issues during operation. The manner in which our requirements were dealt with was exemplary and we received a high standard of equipment, competent personnel and well managed supply of a critical service. Job well done.”

Paul Nickson, Project Manager, Technip FMC